Home Mk4 Beetle Volkswagen New Beetle Third Brake Light Replacement

Volkswagen New Beetle Third Brake Light Replacement

by Frank

The third brake light, also known as the center high mount stop lamp (CHMSL), is an essential safety feature in a vehicle. It alerts drivers behind you when you apply the brakes, reducing the risk of accidents. In the case of a 2004 Volkswagen New Beetle, replacing the third brake light is a straightforward process that can be completed in a few simple steps.

Volkswagen New Beetle Turbo Cost to Maintain and Repair

How-To Replace Third Brake Light in a 2004 Volkswagen New Beetle

Here is a step-by-step guide on how to replace the third brake light in a 2004 Volkswagen New Beetle:

Step 1: Gather the necessary tools and materials

Before starting the process, you will need to gather the following tools and materials:

  • A replacement third brake light assembly (buy on Amazon)
  • A flathead screwdriver
  • A Phillips head screwdriver

Step 2: Remove the old third brake light assembly

The third brake light assembly is located on the rear of the vehicle, just above the rear window. To remove the old assembly, follow these steps:

  1. Open the rear hatch of the vehicle.
  2. Locate the two screws on the bottom of the third brake light assembly.
  3. Using a Phillips head screwdriver, remove the screws.
  4. Gently pull the assembly away from the vehicle.
  5. Disconnect the wiring harness from the assembly by pressing down on the clip and pulling it away from the assembly.

Auxiliary Water Pump Replacement

Step 3: Install the new third brake light assembly

Once you have removed the old third brake light assembly, you can install the new one. Follow these steps:

  1. Align the new assembly with the mounting holes on the rear of the vehicle.
  2. Connect the wiring harness to the assembly by pushing the clip into place until it clicks.
  3. Insert the screws into the mounting holes and tighten them with a Phillips head screwdriver.

Step 4: Test the new third brake light assembly

After installing the new third brake light assembly, it is important to test it to ensure it is functioning properly. To do this, start the vehicle and apply the brakes. If the new assembly lights up, then you have successfully installed it.

Volkswagen New Beetle: A Modern Classic

Wrapping Up

In conclusion, replacing the third brake light assembly in a 2004 Volkswagen New Beetle is a quick and easy process that can be completed in a few simple steps. By following this guide, you can ensure that your vehicle’s safety features are working correctly and reduce the risk of accidents on the road.

You may also like